Study: My Understanding of Welding

Welding – Different Types For Different Purposes There are different types of welding that is used today and each of it has different purpose. In the next lines, this is exactly what we will discuss. Number 1. Stick welding – this is otherwise referred to as Arc welding although, it’s kind of misnomer as TIG welding as well as MIG welding are under arc welding too. Arc welding on the other hand is what a number of people still call stick welding. As a matter of fact, this is an old fashion type of welding that makes use of stick electrode such as 7018, 6013 or 6011 welding rod that is chucked up in an electrode holder and has a small resemblance like a battery jumper cable clamp. The rod is struck like a match in order to get the arc going while the rod is fed in the puddle as it burns. The stick welding is simple and stick welding machine is pretty cheap and simple.
5 Takeaways That I Learned About Supplies
Number 2. MIG welding – this is viewed as one of the easiest kinds of welding to be learnt. This is because of the reason that the rod doesn’t need to be fed as it shortens such as stick welding. A wire is fed in cable and out the end of MIG welding gun as well as the operator needs to pull the trigger and weld. It sounds easy but it is not, however it’s a bit easier to learn compared to stick welding but just a little.
5 Takeaways That I Learned About Supplies
Number 3. TIG welding – deemed as one of the hardest forms of welding to be learnt which is a lot harder than stick or MIG welding. That is because of the fact that both hands are required in TIG welding. One hand is used to hold the TIG torch with tungsten electrode that’s providing heat and arc while the other is for the rod. Oftentimes, TIG welding equipment is more expensive and harder to set up at the same time because there is a remote amperage foot pedal that’s included and it requires argon mix shielding gas in order to work. However, TIG welding is believed to be the most versatile form of welding among others. Virtually, all traditional metals can actually be welded via TIG process ranging from stainless steel, low alloy and carbon steels, nickel alloys, magnesium, aluminum, cobalt, titanium and even copper alloys. Number 4. Plasma arc welding – in this type of welding, it is almost similar to TIG welding but, the tungsten electrode is recessed in the nozzle and heat is created through ionizing gasses that flows around the arc. Whenever there’s high precision welding is required, rest assure that plasma arc welding is used.